This is not an option for the 802.11ac (tall shape) AirPort and Time Capsule those only offer the “Extend a Wireless Network” option, which is much easier, but does not permit chaining WiFi devices.ĪirPort Utility 5.6.1 is also useful for not permitting computers and devices to use an AirPort’s wireless network. You can also use AirPort Utility 5.6.1, and the same method above, if you wish to create a WDS (Wireless Distribution System). You only need version 5.6.1 to be able to get the Time Capsule into “Join a Wireless Network” mode once it’s there, the current version of AirPort Utility works fine. You can also now maintain your Time Capsule using AirPort Utility 6.x, as you would normally. Once the Time Capsule done restarting, you’ll be able to select it as a backup disk in the Time Capsule system preference (Apple Menu -> System Preferences -> Time Machine -> Select Backup Disk), as described in this Apple Support article. Switch back to your regular WiFi network. Choose “Join a Wireless Network”.Ĭhoose your regular network under “Wireless Network Name”, and the password should automatically be filled in. Here’s the tricky part: hold down the Option key on your keyboard, then click the menu next to “Wireless Mode”. If you get asked for Keychain permission, click Allow (and do this for any subsequent steps if you get asked). Select your Time Capsule on the left, and click Manual Setup at the bottom. If you’re using an 802.11ac Time Capsule (tall shape, rather than flat shape), you’ll be warned that the version of AirPort Utility you’re using is incompatible. (If you don’t want to be hassled about it in the future, go to Preferences from the AirPort Utility menu, and uncheck all the boxes.) You’ll probably get notified that there’s a newer version of AirPort Utility. To bypass this, control-click on it, choose “Open”, and then “Open” again. (Or, if you’re still on Mac OS X 10.7 Lion, or 10.8 Mountain Lion, you can open AirPort Utility 5.6.1 directly, without the Launcher.) The first time you do this, you’ll probably get an Unidentified Developer warning. Open AirPort Utility 5.6.1 Launcher from your Utilities folder. (You won’t have internet access once you do.) Now, join your new temporary network from the AirPort menu on your computer. Click Next when it warns you that there’s no cable attached. Set up the Time Capsule using any temporary network name and password (but not your actual one). When it’s done, if it does not say “This AirPort will create a network”, then click “Other Options” in the lower left of the window, and select “Create a new network.” Click Next. Click the “Other Wi-Fi Devices” button in the upper left of the window, and choose your new Time Capsule.ĪirPort Utility will scan your network for a while. If you’ve never set up your Time Capsule before, use AirPort Utility (6.x, which has been included with macOS since 10.7 Lion), in the Utilities folder inside your Applications folder. You may need to enter your computer password. In the resulting window, drag each item (AirPort Utility 5.6.1, and the Launcher) one at a time to your Utilities folder.Open your Utilities folder within your Application folder. Download the Launcher (there are three download options choose the leftmost one).AirPort Utility v5.6.1 Launcher from ZCS.a Time Capsule (any model an AirPort Extreme with an attached drive should work too).You’ve got to go 100% wireless. I discovered a way to set it up 100% wirelessly, with no cables attached. Every now and then, you need to back up to a Time Capsule, but you don’t have access to the router, or a wired network jack.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |